Galaxy Mega Sgh I527 4.4.2 Kitkat Download

Having issues rooting your Galaxy Mega on the Android 4.4.ii firmware I527MVLUCNE5? Well, thanks to krazykipa from XDA for creating a custom firmware for your Galaxy Mega based on the latest KOT49H.I527MVLUCNE5 firmware with root and SuperSU app pre-installed. The firmware is Odin flashable and doesn't incorporate any bootloader, and so information technology won't install knox. However, if you've knox installed on your device so this custom firmware will trip your knox status to 0x1.

Also, if y'all're on Android iv.2.ii firmware with no-knox stuff, then installing this custom iv.4.2 firmware volition work fine but only you won't exist able to charge your phone when it's switched off. To accept that functionality you'll need to take the latest bootloader from iv.4.ii NE5 firmware. Thankfully, krazykipa has provided that also as a separate file.

Without further ado, let'due south striking the downloads section and flash the pre-rooted Android iv.four.2 I527MVLUCNE5 firmware on your Galaxy Mega SGH-I527M.

Alarm!
ROOT GALAXY MEGA SGH-I527M on 4.4.2 I527MVLUCNE5 FIRMWARE
- Step 0: Cheque DEVICE MODEL NO.
- STEP 1: Fill-in YOUR DEVICE
- Stride ii: INSTALL LATEST DRIVER
- STEP iii: INSTALLATION INSTRUCTIONS

STOCK FIRMWARE INFO

Firmware Version	I527MVLUCNE5
Android Version	Android KitKat 4.4.2
Is this Official?	No! It's a pre-rooted firmware
Credits	*krazykipa*

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You simply are responsible for your device. We won't be liable if any damage occurs to your device and/or its components.

ROOT Galaxy MEGA SGH-I527M on 4.4.2 I527MVLUCNE5 FIRMWARE

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

Step 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in 'Almost device' option under Settings. Some other way to confirm model no. is past looking for it on the packaging box of your device. It must exist SGH-I527M!

Practice not use the procedures discussed here on whatever other variant of Milky way Mega or any other device of Samsung or any other company. You have been warned!

Pace 1: Fill-in YOUR DEVICE

Back up of import information and stuff earlier you start playing effectually here equally there are chances you might lose your apps and app-information (app settings, game progress, etc.), and in rare example, files on the internal memory, too.

For help on Backup and Restore, cheque out our exclusive page on that linked right below.

► ANDROID Back up AND RESTORE GUIDE: APPS AND TIPS

STEP 2: INSTALL LATEST DRIVER

You lot must have proper and working driver installed on your windows computer to exist able to successfully flash firmware from Odin using your PC. In case you're not sure, follow the link beneath for a definitive guide for installing driver for your Milky way Mega on your computer.

► SAMSUNG Galaxy MEGA DRIVERS INSTALLATION GUIDE

Pace three: INSTALLATION INSTRUCTIONS

DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a dissever folder on your computer just to go on things tidy.

ODIN ZIP FILE

DOWNLOAD LINK | File proper name:Latest Odin3 v3.09.cypher (951 KB)

FIRMWARE ZIP FILE

DOWNLOAD LINK | File name:ROOT_KOT49H.I527MVLUCNE5.tar.md5 (one.91 GB)

For updates to this firmware → bank check the original evolution folio.

Footstep-By-STEP GUIDE

Instance video : If y'all haven't used Odin before to install a stock firmware or anything else, so we suggest you first watch a video of that to go familiar with the process.The video demonstrates flashing of CWM Recovery on Galaxy S3, but since the procedure is same for flashing stock firmware likewise, the video will help: Click here to sentry the video

Important Note:Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to practise a manufactory reset later flashing stock firmware, which might format internal sd carte du jour too, your files will remain safe on PC.

Extract/Unzip the Odin zip file,Latest Odin3 v3.09.zippo on your computer (using 7-cypher free software, preferably) to get this file:Odin3 v3.09.exe
Move the firmware file, ROOT_KOT49H.I527MVLUCNE5.tar.md5, in the same folder in which y'all extractedLatest Odin3 v3.09.zip (Just for your convenience, that is). So, now you'll accept the following files in that folder:
- Odin3 v3.09.exe
- ROOT_KOT49H.I527MVLUCNE5.tar.md5
Disconnect the Milky way Mega from PC if it is connected.
Double-click theOdin3 v3.09.exe file to open Odin.
Kicking your Samsung Galaxy Mega intoDownload Mode:
- Ability off your phone first and wait for half-dozen-seven seconds after display is off
- Press and hold these three buttons togetheruntil yous seeAlert! screen:Volume Downward + Power + Home
- Press Volume Up now to continue to Download Mode
Connect your Galaxy Mega to PC. Odin window volition show anAdded!! bulletin in bottom left box. Odin's screen would look like this:

If you don't go the Added! message, here are some troubleshooting tips:
- Brand sure you lot have installed commuter for Galaxy Mega as said above.
- If you have already installed driver, and so uninstall them and re-install back.
- Connect using a different USB port on your PC.
- Endeavour a different USB cablevision. The original cable that came with your telephone should work best, if not, try any other cable that's new and of practiced quality.
- Reboot phone and PC and so endeavour once more.
Load the firmware file (extracted in Pace 2) into Odin equally instructed below:
- Click on theAPbutton on Odin and select theROOT_KOT49H.I527MVLUCNE5.tar.md5 file (from step two). Your Odin window should expect something like the screenshot beneath:
Now in the Option section of Odin,make certain that Re-Division box is unchecked. (Motorcar Reboot and F. Reset Fourth dimension boxes remain checked, while all other boxes remain unchecked.)
Double check the higher up two steps.
Click theShowtime push to begin flashing the pre-rooted 4.4.2 NE5 firmware on your Samsung Milky way Mega SGH-I527M, and wait until you run across aLaissez passer!message in Odin's top left box.
When you getPass! message, your phone volition restart automatically. You tin can then disconnect your phone from PC.

If you seeFAIL bulletininstead of the PASS in Odin'due south top left box, that's a problem. Attempt this now: disconnect your Milky way Mega from PC, shut Odin, remove phone'southward battery and put it back within in iii-4 seconds, open Odin and thenrepeat from Step 6 of this guide again.

Too,If device isStuck at setup connection or on any other process, then too, endeavor this: disconnect your Milky way Mega from PC, close Odin, remove phone's battery and put it back within in 3-4 seconds, open Odin and and soecho from Step 6 of this guide once again.

DOWNLOAD HERE

Posted by: coxentoo1961.blogspot.com

Galaxy Mega Sgh I527 4.4.2 Kitkat Download UPDATED